DSL00060 IOSCAPU FAILED
Explanation: An attempt by DLIMIT to capture the UCB for the DLIMIT database failed.
Message Level: E
Response: Please contact Customer support.
DSL00120 DCVT BUILD FAILED
Explanation: DIF was unable to build an SCC-DLimit control block.
Message Level: E
Response: Please contact Customer support.
DSL00121 CONTROL RECORD IS NOT VALID
Explanation: An attempt to open the SCC-DLimit database failed.
Message Level: E
Response: Try stopping and restarting SCC-DLimit. If this fails, please contact Customer support.
DSL00410 RECORD acct-name COULD NOT BE READ
Explanation: An attempt to read a space accounting record (acct-name) from the SCC-DLimit database failed.
Message Level: W
Response: Please contact Customer support.
DSL00500 RECORD acct-name COULD NOT BE WRITTEN
Explanation: An attempt to write a space accounting record (acct-name) to the SCC-DLimit database failed. The database may be full.
Message Level: W
Response: Please contact Customer support.
DSL00510 RECORD acct-name COULD NOT BE CREATED
Explanation: An attempt to write a space accounting record (acct-name) to the SCC-DLimit database failed. The database may be full.
Message Level: W
Response: Please contact Customer support.
DSL00520 RECORD acct-name COULD NOT BE REWRITTEN
Explanation: An attempt to rewrite a space accounting record (acct-name) into the SCC-DLimit database failed. The database may be full.
Message Level: W
Response: Please contact Customer support.
DSL00530 RECORD acct-name COULD NOT BE DELETED
Explanation: An attempt to delete a space accounting record (acct-name) from the SCC-DLimit database failed.
Message Level: W
Response: Please contact Customer support.
DSL00580 SECURITY CHECK FAILED FOR acct-name
Explanation: A user attempted to access the specified account (acct-name) but did not have the authority to do so. If the account name is ‘$CONTROL’, an attempt was made to issue a DLSYS command or other command to change SCC- DLimit defaults, but the user did not have ALTER authority to the DSL.$CONTROL resource.
Message Level: A
Response: All users must have READ authority to the DSL.$CONTROL facility class resource. SCC-DLimit administrators should have ALTER authority to the DSL.$CONTROL profile.
DSL00660 env-name FOR DSN(dsname) VOLUME(volser)
Explanation: Indicates the environment name
(env-name) (ALLOCATE, EXTEND, etc.), data set name (dsname), and volume serial number (volser) for a request for direct access space.
Message Level: None
Response: None. This is an informational message.
DSL00690 INVALID SPACE VALUE
Explanation: The conversion of a character space value to or from a packed decimal value failed.
Message Level: A
Response: Please contact Customer support.
DSL00720 ACCOUNT NAME acct-name HAS INVALID FORMAT FOR DSN=dsname
Explanation: An attempt was made to add an account (acct-name) to the SCC-DLimit database using an invalid name for data set name dsname. SCC-DLimit account names may be 1 to 30 alphameric or national characters.
Message Level: W
Response: Modify the SCC-DLimit rules to use a valid account name.
DSL00810 ** WARNING ** ACCOUNT acct-name IS ABOVE ITS DASD LIMIT
Explanation: The specified account (acct-name) has exceeded its specified limit.
Message Level: A
Response: Decide whether the account space limits should be increased or if data sets should be deleted or migrated.
DSL00811 CHECKING ACCOUNT acct-name ADD amt/unit CUR cur/unit MAX max/unit
Explanation: SCC-DLimit is checking to determine if adding the requested space to the account (acct-name) will cause the account to exceed its limit. ‘amt’ is the amount of space to be added to the account. ‘cur’ is the amount of space currently assigned to the account. ‘max’ is the total amount of space allowed to be used for the account. ‘unit’ is the units in which space is tracked (K, M, G, or tracks).
Message Level: None
Response: None
DSL00910 MODIFYING ACCOUNT acct-name ADD/SUB amt/unit CUR cur/unit MAX max/unit
Explanation: SCC-DLimit is updating the account (acct-name) with the requested space amount. If space is being added to the account, the verb will be ADD. If space is being freed, the verb will be SUB. ‘amt’ is the amount of space to be added to or subtracted from the account. ‘cur’ is the amount of space currently assigned to the account. ‘max’ is the total amount of space allowed to be used for the account. ‘unit’ is the units in which space is tracked (K, M, G, or tracks).
Message Level: None
Response: None
DSL00911 Envir-name Subenvir-name dsname data
Explanation: This message is written by DLIMT to the logfile data set associated with the DIF started task if LOG(ACTIVE) is specified in the DLIMIT defaults. This message is intended for diagnostic purposes.
Message Level: None
Response: None
DSL00940 ** WARNING ** acct-name IS AT # PERCENT OF ALLOWED SPACE - MAX(amt) CUR(amt)
Explanation: An account (acct-name) is approaching the maximum space allowed. The early-warning percentage (#) specified for the account has been exceeded.
Message Level: A
Response: The account may soon exceed its limit. Determine if more space should be allowed for the account or if data sets should be deleted or migrated.
DSL03190 RACROUTE-function FAILED FOR acct-name - RC=rc
Explanation: A System Authorization Facility (SAF) call failed during SCC-DLimit processing. The SAF return code is ‘rc’.
Message Level: None
Response: Please contact Customer support.
DSL03290 VSAM-function FAILED FOR acct- name - RC=rc
Explanation: An attempt to perform a GENCB or MODCB against a VSAM cluster serving as the SCC-DLimit database failed. The function name is shown in ‘function’. The return code from the function is ‘rc’.
Message Level: None
Response: Please contact Customer support.
DSL03291 VSAM-function FAILED - RC=rc
Explanation: An attempt to perform I/O against a VSAM cluster serving as the SCC-DLimit database failed. The function name is shown in ‘function’. The return code from the function is ‘rc’.
Message Level: None
Response: Please contact Customer support.
DSL03320 DATABASE IS FULL
Explanation: An attempt to write a space accounting record to the SCC-DLimit database failed. The database is full.
Message Level: A
Response: Please contact Customer support.
DSL03321 WARNING, DSL DATABASE IS nnn PERCENT FULL
Explanation: A new account record is being added to the DLIMIT database. However, the database has only a limited amount of space left to store records for new accounts.
Message Level: A
Response: Consider stopping DLIMIT and reinitializing the database with more records.
DSL03370 DATABASE CANNOT BE FORMATTED
Explanation: An attempt to format a new database failed. The file could not be opened for output.
Message Level: E
Response: Please contact Customer support.
DSL03371 DATABASE FORMATTED: # TOTAL RECORDS
Explanation: The DLimit database was successfully formatted. (#) records are available for account entries.
Message Level: None
Response: None
DSL03390 BDAM-function FAILED FOR RECORD acct-name RC=rc
Explanation: An attempt to perform I/O against a BDAM file serving as the SCC-DLimit database failed. The function name is shown in ‘function’. The return code from the function is ‘rc’.
Message Level: None
Response: Please contact Customer support.
DSL03410 RLT KEY key-addr ADDED WITH ID record-id. TOTAL table-entries
Explanation: Account record (record-id) added to the internal lookup table.
Message Level: None
Response: None. This is a diagnostic message that is only issued when a DSLLOG dd statement is present.
DSL03420 RLT KEY key-addr DELETED WITH ID record-id. TOTAL table-entries
Explanation: Account record (record-id) deleted from the internal lookup table.
Message Level: None
Response: None. This is a diagnostic message that is only issued when a DSLLOG dd statement is present.
DSL03430 KLT RESYNC STARTED
Explanation: Synchronization of lookup table and database started.
Message Level: None
Response: None. This is a diagnostic message that is only issued when a DSLLOG dd statement is present.
DSL03431 KLT RESYNC FINISHED
Explanation: Synchronization of lookup table and database ended.
Message Level: None
Response: None. This is a diagnostic message that is only issued when a DSLLOG dd statement is present.
DSL40000 SCC-DLIMIT DLMAINT UTILITY PROCESSING DATE mm/dd/yyyy TIME hh/mm/ss
Explanation: This message is issued at the beginning of DLMAINT utility program processing.
Message Level: None
Response: None
DSL40001 COMMAND ENDED WITH RETURN CODE #
Explanation: SCC-DLimit has completed processing a TSO command or DLMAINT control statement. The function ended with the return code (#) displayed.
Message Level: None
Response: None
DSL40002 DLMAINT PROCESSING COMPLETED
Explanation: The DLMAINT Utility has completed its processing.
Message Level: None
Response: None
DSL40003 # ACCOUNTS PROCESSED BY DLMAINT
Explanation: The DLMAINT Utility processed (#) database accounts.
Message Level: None
Response: None
DSL40004 # DATASETS PROCESSED BY DLMAINT
Explanation: The DLMAINT Utility processed (#) data sets.
Message Level: None
Response: None
DSL40005 # VOLUMES PROCESSED BY DLMAINT
Explanation: The DLMAINT Utility processed (#) volumes.
Message Level: None
Response: None
DSL40010 CONTROL STATEMENT:
Explanation: The TSO command or DLMAINT control statement is displayed.
Message Level: None
Response: None
DSL40100 PROCESSING VOLUME volser
Explanation: SCC-DLimit has begun processing for the specified volume (volser).
Message Level: None
Response: None
DSL40110 PROCESSING DATASET dsname
Explanation: SCC-DLimit has begun processing for the specified data set (dsname).
Message Level: None
Response: None
DSL40400 ACCOUNT acct-name FIELDS HAVE BEEN INITIALIZED
Explanation: The values for the specified account (acct-name) have been reset to zero as a result of the DLMAINT RESET control statement.
Message Level: None
Response: None
DSL40500 ACCOUNT acct-name HAS BEEN DELETED
Explanation: The specified account (acct-name) has been deleted from the SCC-DLimit database as a result of the DLDEL command.
Message Level: None
Response: None
DSL40501 ACCOUNT acct-name HAS BEEN BYPASSED (NON-EMPTY)
Explanation: ERASE processing was not performed for the specified account (acct-name) because some of the space fields contain non-zero values.
Message Level: A
Response: If accounts are to be reset to zero even if they contain space values, specify the ‘ALL’ operand on the ERASE control statement.
DSL40600 DSL NOT ACTIVE ON SYSTEM
Explanation: A ‘SET’ statement was encountered to perform processing on the SYSTEM database, but the DSL product was not active.
Message Level: None
Response: Explicitly specify the database to be used or start the DSL product.
DSL40601 RULES PRODUCT NAME NOT ACTIVE
Explanation: A ‘SET RULES’ statement was encountered which specified to use the product rules, but the DSL product is not active.
Message Level: None
Response: Explicitly specify the rule member to be used or start the DSL product.
DSL40602 RULES CANNOT BE FOUND
Explanation: A ‘SET RULES’ statement was encountered which specified a rule name to use, but the rule can not be located.
Message Level: None
Response: Specify a rule member name contained in the PARMLIB DD.
DSL40700 ACCOUNT acct-name HAS BEEN BACKED UP
Explanation: The specified account name (acct-name) has been copied to a sequential file by the DLMAINT BACKUP statement.
Message Level: None
Response: None
DSL40800 ACCOUNT acct-name HAS BEEN RESTORED
Explanation: The specified account name (acct-name) has been copied to a sequential file by the DLMAINT BACKUP statement.
Message Level: None
Response: None
DSL40900 DATASET-dsname, ACCOUNT-acct-name, USED # TRACKS
Explanation: This message is issued to SYSPRINT during DLimit RESYNC processing. It indicates, for each data set (dsname) processed by RESYNC, the first account (acct- name) to which the data set is assigned by the DSL rules and the space occupied by the data set (and which will be used to update the account record for the DSL account).
Message Level: None
Response: None
DSL41000 ACCOUNT acct-name HAS BEEN PROCESSED
Explanation: Processing has been completed for the specified SCC-DLimit account (acct-name).
Message Level: None
Response: None
DSL41100 acct-name
Explanation: The specified account name (acct-name) is displayed as the result of a SHOW statement.
Message Level: None
Response: None
DSL41200 COMMAND TERMINATED WITH RETURN CODE rc
Explanation: An SCC-DLimit TSO command terminated with a nonzero return code. The return code (rc) is shown.
Message Level: None
Response: Determine the cause of the error and rerun the command.
DSL41300 VOLUME volser operation
Explanation: The specified volume (volser) has been RESERVEd for the indicated operation. The operation may be RESYNC or any other DLMAINT function.
Message Level: None
Response: None
DSL41400 DATASET=dsname,
ACCOUNT=acct-name, USED n TRKS
Explanation: Space for the indicated migrated data set has been added to the specified account as a result of the HSM control statement. ‘dsname’ is the data set name, ‘acct-name’ is the name of the SCC-DLimit account, and ‘n’ is the number of tracks occupied by the data set. This value is converted to the value used by the account (KB, MB, GB, or tracks) before being added to the account.
Message Level: None
Response: None
DSL41401 HSM RESYNC PROCESSING ENDED
Explanation: DLMAINT processing has completed for RESYNC of HSM migrated data.
Message Level: None
Response: None
DSL41501 Errortext
Explanation: This message is issued when an error is encountered in the way the REPORT statement has been asked to format a DLIMIT report. 'Errortext' may be any of the following:
ddname DD COULD NOT BE OPENED
FIELD LENGTHS TOO LONG FOR OUTPUT RECORD TOO MANY REPORT FIELDS
NO REPORT FIELDS SPECIFIED
LRECL TOO LONG, GREATER THAN 255 LRECL TOO SHORT TO CONTAIN ALL FIELDS
Message Level: E
Response: Correct the REPORT control statement.
DSL41600 acct-name, dsname, volume, cur-space
Explanation: Account Detail Report line produced from program DSLREPT. The account name (acct-name), data set name (dsname), volume (volume), and current space amount (cur-space) used by the data set are displayed.
Message Level: None
Response: None
DSL41601 acct-name, cur-space, old-space, diff-space
Explanation: Account Detail Report line produced from program DSLREPT. The account name (acct-name), current space amount (cur-space) used by the account, old space amount (old-space) previously used by the account, and the difference (diff-space) between the two amounts.
Message Level: None
Response: None
DSL41602 END OF REPORT
Explanation: Account Detail Report line produced from program DSLREPT. The report program has completed.
Message Level: None
Response: None
DSL41610 DSNAME VOLUME ACCOUNT SPACE
Explanation: Data set Detail Report header line produced from program DSLREPT.
Message Level: None
Response: None
DSL41700 ACCOUNT OLD NEW
Explanation: RESYNC Report header line produced during RESYNC processing. The account name, old space amount previously used by the account, and current space amount used by the account are listed.
Message Level: None
Response: None
DSL41800 acct-name HAS BEEN COPIED
Explanation: The indicated DLIMIT account
(acct-name) has been processed during a DLIMIT database REORG operation.
Message Level: None
Response: None
DSL41801 RUNNING FUNCTION funcname
Explanation: The function indicated by funcname (INITRTN, QUIESCE, or ACTIVE) is being performed to stop or start DLIMIT database processing as a result of a REORG or other command. This message is passed to other systems in the sysplex so that they are aware of the suspension or resumption of DLIMIT activity.
Message Level: None
Response: None
DSL41802 funcname RC=retcode/rsncode/ rsncode2
Explanation: When suspending or resuming DLIMIT database processing as a result of a REORG command, this message indicates the return (retcode) and reason codes (rsncode/rsncode2) if the attempt to pass the message to other systems in the sysplex was unsuccessful.
Message Level: E
Response: Please contact Customer support.
DSL41803 NEW DATABASE HAS nnnnn TOTAL AND yyyyyy USED RECORDS
Explanation: This message is issued after a REORG of the DLIMIT database to indicate the total number of formatted account records (nnnnn) and the number of records in use (yyyyy).
Message Level: None
Response: None
DSL50020 INVALID ACCOUNT NAME
Explanation: An attempt was made to issue a DLimit TSO command against the $CONTROL database record, which is a special record and not supported by the TSO commands.
Message Level: W
Response: Specify a correct account name.
DSL50100 ACCOUNT acct-name ALREADY EXISTS
Explanation: An attempt was made to add an account (acct-name) to the SCC-DLimit database. The specified account name already exists.
Message Level: W
Response: Specify a correct account name.
DSL50101 ACCOUNT acct-name HAS BEEN ADDED
Explanation: An attempt was made to add an account (acct-name) to the SCC-DLimit database. The specified account name was added.
Message Level: None
Response: None
DSL50110 MODEL ACCOUNT DOES NOT EXIST
Explanation: The account name specified to be used as a model account does not exist in the SCC-DLimit database.
Message Level: W
Response: Specify a valid account name.
DSL50200 ACCOUNT acct-name DOES NOT EXIST
Explanation: An attempt was made to list or alter an SCC-DLimit account (acct-name). The specified account does not exist in the SCC-DLimit database.
Message Level: W
Response: Specify a valid account name.
DSL50201 ACCOUNT acct-name HAS BEEN ALTERED
Explanation: An attempt was made to alter an
SCC-DLimit account (acct-name). The account was altered as indicated.
Message Level: None
Response: None
DSL50300 ACCOUNT acct-name DOES NOT EXIST
Explanation: An attempt was made to list or alter an SCC-DLimit account (acct-name). The specified account does not exist in the SCC-DLimit database.
Message Level: W
Response: Specify a valid account name.
DSL50301 ACCOUNT acct-name HAS BEEN DELETED
Explanation: An attempt was made to delete an account from the SCC-DLimit database. The specified account name was deleted.
Message Level: None
Response: None
DSL50500 ACCOUNT acct-name DOES NOT EXIST
Explanation: An attempt was made to list an SCC-DLimit account (acct-name). No account with the specified name exists.
Message Level: W
Response: Specify a valid account name.
DSL50510 ACCOUNT: acct-name MODE: mode force/noforce
Explanation: An attempt was made to list an
SCC-DLimit account (acct-name). The account information is displayed.
Message Level: None
Response: None
DSL50511 DESCRIPTION: description
Explanation: An attempt was made to list an
SCC-DLimit account. The account information (description) is displayed.
Message Level: None
Response: None
DSL50512 CREATED ON: date AT: time
Explanation: An attempt was made to list an
SCC-DLimit account. The account information is displayed.
Message Level: None
Response: None
DSL50513 LAST USED ON: date AT: time
Explanation: An attempt was made to list an
SCC-DLimit account. The account information is displayed.
Message Level: None
Response: None
DSL50514 WARNING PERCENTAGE IS: nn
Explanation: An attempt was made to list an
SCC-DLimit account. The account information is displayed.
Message Level: None
Response: None
DSL50515 TSO USERID TO BE NOTIFIED ON WARNING/FAILURES userid
Explanation: An attempt was made to list an
SCC-DLimit account. The account information is displayed.
Message Level: None
Response: None
DSL50516 LOG DDNAME TO BE USED ON WARNING/FAILURES ddname
Explanation: An attempt was made to list an
SCC-DLimit account. The account information is displayed.
Message Level: None
Response: None
DSL50517 CURRENT: amt MAX:amt
Explanation: An attempt was made to list an
SCC-DLimit account. The account information is displayed.
Message Level: None
Response: None
DSL50518 HWM OF amt OCCURRED ON date AT time
Explanation: An attempt was made to list an
SCC-DLimit account. The account information is displayed.
Message Level: None
Response: None
DSL50519 HWM OF amt HAS NOT OCCURRED
Explanation: An attempt was made to list an
SCC-DLimit account. The account information is displayed.
Message Level: None
Response: None
DSL50530 SYSTEM SETTINGS:
Explanation: A DLSYS statement was issued requesting that the contents of the $CONTROL record be displayed.
Message Level: None
Response: None
DSL50531 RACF/VSAM/BDAM DATABASE: ddname
Explanation: A DLSYS statement was issued requesting that the contents of the $CONTROL record be displayed.
Message Level: None
Response: None
DSL50532 AUTOCREATE: YES/NO:
Explanation: This message is displayed in response to a DLSYS statement to show whether accounts are automatically created when a request for space is assigned to an account that does not yet exist in the database.
Message Level: None
Response: None
DSL50533 SYSTEM MODE: mode FORCE/ NOFORCE
Explanation: This message is displayed as the result of a DLSYS statement and indicates whether the account MODE (mode) specified at the system level may override the account mode specified at the account level.
Message Level: None
Response: None
DSL50534 RECORDS - TOTAL: #, USED: #, DELETED:
Explanation: This message is displayed as the result of a DLSYS statement and indicates the number of records in the database.
Message Level: None
Response: None
DSL50535 LOG:ddname ACTIVE/INACTIVE
Explanation: Indicates the status in the DLIMIT defaults (the DLSYS command) of the logfile for the indicated DD name (ddname).
Message Level: None
Response: None
DSL50536 FULL PERCENTAGE: pct, MESSAGE EVERY nnn MINUTES
Explanation: Indicates the status in the DLIMIT defaults (the DLSYS command) for when warnings should be issued when the DLIMIT database is approaching a full condition. The warning is issued every 'nnn' minutes once the database reaches the specified percentage (pct) full.
Message Level: None
Response: None
DSL50600 CONTROL RECORD RE-READ FLAG ON
Explanation: This message is displayed as the result of a DLSYS command with the SYSTEM option specified and indicates whether various debugging flags are on in the
$CONTROL record. Message Level: None Response: None
DSL50601 CONTROL RECORD ERROR FLAG ON
Explanation: This message is displayed as the result of a DLSYS command with the SYSTEM option specified and indicates whether various debugging flags are on in the
$CONTROL record. Message Level: None Response: None
DSL50602 CONTROL RECORD COULD NOT BE CREATED
Explanation: This message is displayed when DLimit attempted to create a $CONTROL record in the database but could not do so.
Message Level: W
Response: Check to see that the DLimit database has been properly allocated or defined. Ensure that the issuer of the DLSYS command has ALTER access to the DSL.$CONTROL resource. Stop and restart DLimit. If this fails to resolve the problem, contact Customer support.
DSL50603 CONTROL RECORD COULD NOT BE MODIFIED
Explanation: This message is displayed when DLimit attempted to update a DSL.$CONTROL record in the database but could not do so.
Message Level: W
Response: Check to see that the DLimit database is properly allocated or defined. Ensure that the issuer of the DLSYS command has ALTER access to the $CONTROL resource. Stop and restart DLimit. If this fails to resolve the problem, contact Customer support.
DSL50701 DSNAME=dsn VOL=volser
Explanation: This message is produced by the DLDSN command. DSLDSN executes the DLIMIT rules for each data set name (dsn) on a volume (volser) and shows, along with messages DSL50702 and DSL50703, the account name(s) that would be assigned to the data set if the data set were to be allocated as NEW.
Message Level: None
Response: None
DSL50702 ACCOUNT acct-name
Explanation: This message is produced by the DLDSN command. DSLDSN executes the DLIMIT rules for each data set name on a volume and shows, along with messages DSL50701 and DSL50703, the account name(s) (acct-name) that would be assigned to the data set if the data set were to be allocated as NEW.
Message Level: None
Response: None
DSL50703 NOT ASSIGNED TO ANY ACCOUNT
Explanation: This message is produced by the DLDSN command. DSLDSN executes the DLIMIT rules for each data set name on a volume and shows, along with messages DSL50701 and DSL50702, the account name(s) that would be assigned to the data set if the data set were to be allocated as NEW.
Message Level: None
Response: None
DSL50704 A REQUIRED VOL PARAMETER HAS BEEN OMITTED
Explanation: A 'VOL' parameter was not specified on the DLDSN command. 'VOL' is required for this command.
Message Level: E
Response: Specify a VOL parameter and reissue the command
DSL50705 VOLSER MASK CANNOT BEGIN WITH AN ASTERISK
Explanation: The VOL parameter on the DLDSN command begins with an asterisk. Only trailing asterisks are allowed in this parameter.
Message Level: E
Response: Correct the VOL parameter and reissue the command.