Verifying a communications link for system definitions - assure_mimix - 10.0

Do the following to verify that the communications link defined for each system definition is operational:

1. From the MIMIX Basic Main Menu, type an 11 (Configuration menu) and press Enter.

2. From the MIMIX Configuration Menu, type a 1 (Work with system definitions) and press Enter.

3. From the Work with System Definitions display, type an 11 (Verify communications link) next to the system definition you want and press Enter. You should see a message indicating the link has been verified.

   Note: If the system manager is not active, this process will only verify that communications to the remote system is successful. You will also see a message in the job log indicating that “communications link failed after 1 request.” This indicates that the remote system could not return communications to the local system.
4. Repeat this procedure for all system definitions

   Note: MIMIX uses the Verify Communications Link command to validate the information that has been specified for the Relational database (RDB) parameter. MIMIX also uses VFYCMNLNK to verify that the System 1 and System 2 relational database names exist and are available on each system.