Ending the TCP/IP server - assure_mimix - 10.0

Assure MIMIX Operations Guide
Product type
Software
Portfolio
Integrate
Product family
Assure
Product
Assure MIMIX™ Software
Version
10.0
ft:locale
en-US
Product name
Assure MIMIX
ft:title
Assure MIMIX Operations Guide
Copyright
2026
First publish date
1999
ft:lastEdition
2026-01-13
ft:lastPublication
2026-01-13T10:54:54.977000
L1_Product_Gateway
Integrate
L2_Product_Segment
IBM Infrastructure
L3_Product_Brand
Precisely Assure
L4_Investment_Segment
IBM i HA
L5_Product_Group
IBM i HA
L6_Product_Name
Assure MIMIX

To end the TCP server, do the following on both systems defined by the transfer definition. One example of why you might end the TCP server is when you are preparing to upgrade the MIMIX products in a product library.

Note: Use the host name and port number (or port alias) defined in the transfer definition for the system you on which you are running this command

To end the TCP server on a system, do the following:

  1. From the MIMIX Intermediate Main Menu, select option 13 (Utilities menu) and press Enter.

  2. The Utilities Menu appears. Select option 52 (End TCP server) and press Enter.

  3. The End Lakeview TCP Server display appears. At the Host name or address prompt, specify the host name for the local system as specified in the transfer definition.

  4. At the Port number or alias prompt, verify that the value shown is what you want. If necessary change the value.

    Note: If the configuration uses port aliases, specify the alias for local system. Otherwise, specify the port number for the local system.

  5. Press Enter.