Checking the job log of an audit - assure_mimix - 10.0

An audit’s job log can provide more information about why an audit failed. If it still exists, the job log is available on the system where the audit ran. Typically, this is the management system.

You must display the notifications from an audit in order to view the job log. Do the following:

1. From the Work with Audits display, type 7 (History) next to the audit and press Enter.

2. The Work with Audit History display appears with the most recent run of the audit at the top of the list.

3. Use option 12 (Display job) next to the audit you want and press Enter.

4. The Display Job menu opens. Select option 4 (Display spooled files). Then use option 5 (Display) from the Display Job Spooled Files display.

5. Look for messages from the job log for the audit in question. Usually the most recent messages are at the bottom of the display.

   Message LVE3197 is issued when errors remain after an audit completed.

   Message LVE3358 is issued when an audit failed. Check for following messages in the job log that indicate a communications problem (LVE3D5E, LVE3D5F, or LVE3D60) or a problem with data group status (LVI3D5E, LVI3D5F, or LVI3D60).