These messages are only produced when debugging traces have been activated, and this should only be done on specific request from Precisely Support.
AZS194D 0(R1)=xxxxxxxx 4(R1)=xxxxxxxx GBLCRLIM=xxxxxxxx
Meaning: Debug information while processing in module ACQPPRB.
Module: ACQPPRB
AZS195D BD=XX AD=XX TD=XX WORKNUM=XXXXXXXX WORKPACK=XXXXXXXX
Meaning: Debug information while processing in module ACQPPRB.
Module: ACQPPRB
AZS229D tttt rrrrrrrr mmmmmmm ccccccc
Meaning: When debugging is turned on for the SCAN function, it will report each intermediate record types, counts, sizes in MB and disk cylinders.
Module: ACQSRUN
AZS290D text
Meaning: Debug message during a SCAN run.
Module: ACQSRUN
AZS372D jjjjjj iiiiiiii step T=nnn S=nn A=nnn I=nnn
Meaning: Debug message listing some SMF type 30 CPU usage information.
Module: ACQCE30
AZS373D F x rlen icoff ilen inum zedcoff zlen znum
Meaning: Debug message listing the SMF type 30 record length and offset, lengths and numbers of instruction count and z/EDC segments.
Module: ACQCE30
AZS388D R=rrr:ss STOD=recordTOD S=startTOD E=endTOD
Meaning: Debug message listing the record type and subtype, the TOD form the record and the start and end TOD in effect from SDATE/STIME and EDATE/ETIME.
Module: ACQCRUN
AZS389D JOB=jjjjjjjj JNO=nnnnnnnn
Meaning: Debug message listing a job name and number.
Module: ACQCRUN
AZS411D ssss dddddddd tttttttt xx xxxxx yyyyy oooooooo
Meaning: Debug message showing key fields from the CICS data expansion routine.
Module: ACQCICEX
AZS415D n=xxxxxxxx n=xxxxxxxx n=xxxxxxxx n=xxxxxxxx
Meaning: Debug message showing key register values in the CICS data expansion routine.
Module: ACQCICEX
AZS416D x ASS=xxxxxxxx ASL=xxx ASN=xxx
Meaning: Debug message showing field values in the CICS data expansion routine.
Module: ACQCICEX
AZS417D CSR WORK AREA AT xxxxxxxx LENGTH IS xxxxxxxx
Meaning: Debug message showing the address and length of the data expansion work area.
Module: ACQCICEX
AZS490D INCOMING SMFMNDCN=rrrr SAVED CONNCNT=iiii
Meaning: Debug message showing the incoming number of connectors in a new CICS record and the number stored from the previous record.
Module: ACQCICSM
AZS491D XXXX R2=XXXXXXXX R3=XXXXXXXX R4=XXXXXXXX R5=XXXXXXXX
Meaning: Debug message showing various registers at entry to the CICS mapping facility.
Module: ACQCICSM
AZS492D G=XXXXXXXX S=XXXXXXXX D=XXXXXXXX O=XXXXXXXX
Meaning: Debug message showing key addresses at entry to the CICS mapping facility.
Module: ACQCICSM
AZS493D RA=XXXXXXXX RV=XXXX DA=XXXXXXXX DV=XXXXXXXXXXXXXXXX
Meaning: Debug message.
Module: ACQCICSM
AZS494D ACQCICSM IS ENDING, RC=xxxxxxxx
Meaning: Debug message showing if the incoming CICS record had the same as details as a previous one (if RC=0) or was a new one (if RC=4).
Module: ACQCICSM
AZS499D CONNECTOR=xxxx OFFSET=yyyy
Meaning: Debug message showing the calculated offset in a CICS record for a specific connector.
Module: ACQCICSM
AZS502D applid tran elapsed wait
Meaning: Debug. Applid, transaction, elapsed and wait times that were to be used to calculate a response time, but wait is greater than elapsed.
Module: ACQCICR
AZS513D ACQIPUT READ appl tran count
Meaning: Debug. ACQIPUT read back a transaction tran from CICS application appl and was record number count.
Module: ACQIPUT
AZS514D n target int date time tod type
Meaning: Debug information relating to the target, interval number and dates and times of data.
Module: ACQIPUT
AZS518D GBLSREC: xxxxxxxx CODE: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Meaning: Debug message showing key field values for ACQIPUT.
Module: ACQIPUT
AZS601D RESTART n> JOB=xxxxxxxx JOB=nnnnnnnn
Meaning: Debug. Indication that a job has restarted in JES.
Module: ACQATHJB
AZS610D TYPE=xxxx BA=xxxxxxxx BL=xxxx AL=xxxx
Meaning: Debug. Key addresses and lengths for the data squeezing module ACQTHZ.
Module: ACQATHZ
AZS611D I=xxxxxxxxxxxxxxxxxxx IL=xxxx OL=xxxx x O=xxxxxxxxxxxxxx
Meaning: Debug. Key addresses and lengths for the data squeezing module ACQTHZ.
Module: ACQATHZ
AZS630D name S#: xxxx ST: xxxx A#: xxxx AT: xxxx
Meaning: Debug message concerning service requests and times for Coupling Facility data
Module: ACQCE744
AZS660D Tn=tttttt/sssss CP#=nnnnn CPA=aaaaa WLA=wwwww
Meaning: Debug. Target tttttttt, SMF ID ssss has nnnnn CP processors, field SMF70CPA is aaaaa and field SMF70WLA is wwwww. The Tn value will be T1 from checking the PHYSICAL LPAR CP count and T2 after checking the CPU data section count.
Module: ACQCE70R
AZS674D 32KB WORK AREA FOR TMON/CICS DECOMPRESSION IS AT xxxxxxxx
Meaning: Debug message showing where the decompression work area for TMON/CICS data was obtained.
Module: ACQTMCXX
AZS675D B-ADD/LEN=xxxxxxxx/xxxx A-Len=xxxx
Meaning: Debug message showing the before address and length and the after length of a TMON/CICS record that has been decompressed.
Module: ACQTMCXX
AZS70RD text
Meaning: Debug message.
Module: ACQCE70R
AZS700D TYPE 70-x: DATE=ddMMMyy TIME=hh:mm:ss.th LEN=nnnnn
Meaning: Debug. Detection of a new type 70 record with subtype 1 or 2.
Module: ACQCE70
AZS701D xxxx CP=nnnnnnnnnnnn AP=nnnnnnnnnnnn IP=nnnnnnnnnnnnnn
Meaning: Debug. Aggregated wait time from CPUs (CP, zAAP and zIIP) from type 70 record. xxxx will be one of these strings: MVS WAIT or PARK
Module: ACQCE70
AZS703D tttttttt/ssss HAS SPLIT TYPE 70 RECORDS. THIS IS n OF m
Meaning: Debug message. The target and system identified has type 70 records that are recorded as being split over two or more physical records because the total logical size of the record exceeds 32KB. This is most often the result of data from a machine with a large number of processors and/or partitions. It does not cause Acquire or Syncsort Capacity Management any problems.
Module: ACQCE70
AZS724D [S|R]CLASS=xxxxxxxx CP=xxxx AP=xxxx IP=xxxx
Meaning: Debug message listing out the CP, zAAP and zIIP times for a given Service or Report Class from a type 72 SMF record.
Module: ACQCE72
AZS728D x # nnnnn FP=xxxxxxxxxxxx BI=xxxx PD=xxxx
Meaning: Debug message.
Module: ACQCE702
AZS729D text
Meaning: Debug message.
Module: ACQCE702
AZS731D HV: O=xxxxxxxx L=xxxx N=xxxx
Meaning: Debug message to show key HyperPAV values.
Module: ACQCE78
AZS732D HV: LCU=xxxx CU=xxxx
Meaning: Debug message to show key HyperPAV values.
Module: ACQCE78
AZS733D HV: WROTE xxxxx 0503 RECORDS
Meaning: Debug message to show how many HyperPAV records were generated.
Module: ACQCE78
AZS799D text
Meaning: Debug message showing the RMF samples count for a type 70 record.
Module: ACQCE70
AZS810D ACQAPUT 0910 RECORDS: xxxxxxxxx TRANS: xxxxxxxxx
Meaning: Debug message providing information about the writing of CICS transaction data.
Module: ACQAPUT
AZS811D BG: xxxxxxxx FN: xxxxxxxx RL: xxxx SQ: xxxxx RT: xxxx R9: xxxxxxxx
Meaning: Debug message providing key information used in the writing of USS data.
Module: ACQAPUT
AZS812D NI=xxxxx T=xxxx NO=xxxxx
Meaning: Debug message providing information used in the writing of output data.
Module: ACQAPUT
AZS901D S tttttttt address
Meaning: Debug message indicating the SMFTAB address for a given target.
Module: ACQPP
AZS914D x tttttttt iii yyyymmdd hhmmss0000000000 todstamp
Meaning: Debug : Target, interval number, interval start date time.
Module: ACQIPUT
AZS927D sid aaaaaaaa vvvv (name) (flag)
Meaning: Debug : SMF ID, CICS applid, version and version name plus dictionary flag.
Module: ACQCICS
AZS928D sid aaaaaaaa ffffffff llll oooo
Meaning: Debug : SMF ID, CICS applid, dictionary field name, length, offset.
Module: ACQCICS
AZS941D tttttttt/ssss date time devn/volser IOR=rate
Meaning: In the RMF interval starting date time for system sid the device with address dev and volume serial volser was dropped from being output by Acquire because the I/O rate of rate was lower than the value specified by the user in an IORATE= parameter. This message is only produced if debugging is in effect for module ACQATHIO.
Module: ACQATHIO
AZS965D x aaaaaaaa vvvv cccc
Meaning: Debug : CICS APPLID, version and number of connectors information
Module: ACQCICS
AZS970D x vvvvvvvv
Meaning: Debug : LPAR processor information
Module: ACQCE70P
AZS981D ssssaaaaaaaa
Meaning: Debug : SMF ID and applid of CICS system for which no dictionary record could be found
Module: ACQCICS
AZS989D tttttttt iiii
AZS989D id value
Meaning: Debug : Target and interval number or specific id and field value
Module: ACQATH
AZS988D <text>
Meaning: Debug message
Module: ACQATHCX
AZS990D ACQATHCX WRITING OUT - aaaaaaaa xxxx nnnnnnn ttttttt
Meaning: Debug: CICS APPLID, transaction name, # trans, #trans total
Module: ACQATHCX
AZS991D aaaaaaaa ssssssss tttttttttttttttt nnnnnnn
Meaning: Debug: aaaaaaaa = CICS APPLID ssssssss = SMF time tttttttttttttttt = GMT TOD offset, nnnnnnn = # transactions in 110 record
Module: ACQCICS
AZS992D xxxx ssssssssssssssss eeeeeeeeeeeeeeee ccccccc
Meaning: Debug: tran, start time, end time, cumulative tran count
Module: ACQCICS
AZS993D appl tran n
Meaning: Debug: n'th transaction tran from applid appl in the intermediate file.
Module: ACQCICS
AZS994D wwwwwww ttttttttt
Meaning: Debug: wwwwwww = #records written ttttttttt = cumulative count written
Module: ACQCICS
AZS995D sid appl
Meaning: Debug: Key to test if CICS dictionary record already seen
Module: ACQCICS
AZS996D sid appl
Meaning: Debug: CICS dictionary record released from internal table for sid appl
Module: ACQCICS
AZS997D sid appl
Meaning: Debug: CICS dictionary record saved to internal table for sid appl
Module: ACQCICS
AZS998D appl sid field
Meaning: Debug: CICS applid appl from system sid has a field field in its CICS dictionary record that has an offset of x'FFFF' and so will prevent the use of the Acquire internal dictionary.
Module: ACQCICS