Location codes that begin with an "A" are address location codes. Address location codes detail the known qualities about the geocode.
An address location code has the following characters.
|
1st character |
Always an " |
|
|
2nd character |
May be one of the following |
|
|
|
Interpolated address point location. |
|
|
|
Application infers the correct segment from the candidate records. |
|
|
|
Point-level data location. |
|
|
|
Location represents a ranged address. |
|
|
|
Location on a street range. |
|
|
|
Location on an intersection of two streets. |
|
|
3rd and 4th character |
Digit indicating other qualities about the location. |
|
The following table define the address location codes.
| Code | Description | |
|---|---|---|
APnn
|
Indicates a point-level geocode match
representing the center of a parcel or building, where
nn is one of the following values: |
|
nn = 02
|
Parcel centroid Indicates the center of an accessor's parcel (tract or lot) polygon. When the center of an irregularly shaped parcel falls outside of its polygon, the centroid is manually repositioned to fall inside the polygon as closely as possible to the actual center. |
|
nn = 04
|
Address point Represents field-collected GPS points with field-collected address data. |
|
nn = 05
|
Structure point Indicates a location within a building footprint polygon that is associated with the matched address. Usually, residential addresses consist of a single building. For houses with outbuildings (detached garages, sheds, barns, etc.), the structure point will typically fall on the primary structure. Condominiums and duplexes have multiple, individual addresses and may have multiple structure points for each building. Multi-unit buildings are typically represented by a single structure point associated with the primary/base address, rather than discrete structure points for each unit. Shopping malls, industrial complexes, and academic or medical center campuses are commonly represented by a single structure point associated with the primary/base address for the entire complex. When multiple addresses are assigned to multiple buildings within one complex, multiple structure points may be represented within the same complex. |
|
nn = 07
|
Manually placed Address points are manually placed to coincide with the midpoint of a parcel's street frontage at a distance from the center line. |
|
nn = 08
|
Front door point Represents the designated primary entrance to a building. If a building has multiple entrances and there is no designated primary entrance or the primary entrance cannot readily be determined, the primary entrance is chosen based on proximity to the main access street and availability of parking. |
|
nn = 09
|
Driveway offset point Represents a point located on the primary access road (most commonly a driveway) at a perpendicular distance of between 33-98 feet (10-30 meters) from the main roadway. |
|
nn = 10
|
Street access point Represents the primary point of access from the street network. This address point type is located where the driveway or other access road intersects the main roadway. |
|
nn = 21
|
Base parcel point When unable to match to an input unit number, or when the unit number is missing from an address location with multiple units, the "base" parcel information is returned, the address is not standardized to a unit number, and additional information, such as an Assessor's Parcel Number, is not returned. |
|
nn = 22
|
Backfill address point The precise parcel centroid is unknown. The address location assigned is based on two known parcel centroids. |
|
nn = 23
|
Virtual address point The precise parcel centroid is unknown. The address location assigned is relative to a known parcel centroid and a street segment end point. |
|
nn = 24
|
Interpolated address point The precise parcel centroid is unknown. The address location assigned is based on street segment end points. |
|
AIn
|
The correct segment is inferred from the candidate records at match time. | |
ASn
|
House range address geocode. This is the most accurate street interpolated geocode available. | |
AIn, ASn and ACn share the same values
for the 3rd character "n" as
follows:
|
||
n = 0
|
Best location. | |
n = 1
|
Street side is unknown. The Census FIPS Block ID is assigned from the left side; however, there is no assigned offset and the point is placed directly on the street. | |
n = 2
|
Indicates one or both of the following:
Note: Only the second case is valid for non-TIGER data because
segment range interpolation is only completed for TIGER
data.
|
|
n = 3
|
Both 1 and 2. | |
n = 7
|
Placeholder. Used when starting and ending points of segments contain the same value and shape data is not available. | |
ARn
|
Ranged address geocode, where
"n" is one of the following: |
|
n = 1
|
The geocode is placed along a single street segment, midway between the interpolated location of the first and second input house numbers in the range. | |
n = 2
|
The geocode is placed along a single street segment, midway between the interpolated location of the first and second input house numbers in the range, and the side of the street is unknown. The Census FIPS Block ID is assigned from the left side; however, there is no assigned offset and the point is placed directly on the street. | |
n = 4
|
The input range spans multiple USPS segments. The geocode is placed on the endpoint of the segment which corresponds to the first input house number, closest to the end nearest the second input house number. | |
n = 7
|
Placeholder. Used when the starting and ending points of the matched segment contain the same value and shape data is not available. | |
AXn
|
Intersection geocode, where
"n" is one of the following: |
|
n = 3
|
Standard single-point intersection computed from the center lines of street segments. | |
n = 8
|
Interpolated (divided-road) intersection geocode. Attempts to return a centroid for the intersection. | |