This appendix describes the messages generated on the Ironstream Management Server.
Socket Communication Errors
Code |
Definition |
|---|---|
EVOSOK001 |
%s failed calling %s, reason: %s |
EVOSOK010 |
Unable to open %s %s socket |
EVOSOK020 |
Unable to bind socket |
EVOSOK030 |
Unable to set socket to non-blocking mode |
EVOSOK031 |
Unable to set socket to blocking mode |
EVOSOK040 |
Error on listen for socket connection |
EVOSOK050 |
Socket connect failed, will retry momentarily |
EVOSOK051 |
Socket connect failed, no retry will be attempted |
EVOSOK070 |
Unable to get socket option: %s |
EVOSOK071 |
Unable to get socket option: %s |
EVOSOK080 |
%s failed reading MMS socket, reason: %s |
EVOSOK081 |
Failure reading %s client UDP socket |
EVOSOK082 |
Failure reading %s server UDP socket, number bytes returned is zero |
EVOSOK083 |
Failure reading %s server UDP socket, entire message not sent |
EVOSOK090 |
Failure writing to %s client UDP socket |
EVOSOK092 |
Failure writing to %s client UDP socket, entire message not sent |
EVOSOK199 |
Failure reading Ironstream /Open Mainframe Message Server, reason: % |
EVOSOK200 |
Lost connection with Ironstream/Open Mainframe Message Server |
EVOSOK201 |
%s has exited due to read failure on MMS connection |
EVOSOK202 |
%s has lost connection with the MMS |
EVOSOK203 |
%s has exited due to loss of connection with the Command Server |
EVOSOK220 |
MMS failed sending command response to the Command Server |
EVOSOK221 |
No TCP connection with Doman: %s |
Management Platform API Errors
Code |
|
|---|---|
EVOAPI001 |
|
EVOAPI002 |
|
EVOAPI003 |
|
EVOAPI004 |
|
EVOAPI005 |
|
EVOAPI006 |
|
EVOAPI100 |
|
EVOAPI101 |
|
EVOAPI200 |
|
EVOAPI201 |
|
EVOAPI205 |
|
Process Initialization Errors
Code |
Definition |
|---|---|
EVOINI000 |
%s initialized successfully |
EVOINI001 |
%s initialized successfully for domain %s |
EVOINI010 |
%s started with invalid argument count |
EVOINI011 |
Domain name must be passed in to the %s |
EVOINI012 |
Invalided transaction program name executable used to start %s |
EVOINI013 |
Resource name with domain extension must be passed into the %s |
EVOINI020 |
%s encountered invalid for configuration parameter %s |
EVOINI030 |
%s needs the %s environment variable set properly |
EVOINI040 |
Error setting debug value, unable to find module %s in %s |
EVOINI050 |
%s unable to open log file: exiting |
EVOINI060 |
Required configuration parameter is missing: %s |
EVOINI070 |
Unable to obtain memory for Status Mapping table |
EVOINI071 |
Unable to open OV Status Map File %1$s - Reason %2$s |
EVOINI072 |
Unable to open vpo_severity.conf file |
EVOINI073 |
Too many entries in vpo_severity.conf file - Notify support |
EVOINI074 |
Invalid severity range on record %1$d - Notify system administrator |
EVOINI075 |
Warning - overlapping range in vpo_severity.conf file record - %1$d |
EVOINI076 |
Invalid severity in vpo_severity.conf file on record %1$d |
Process Execution Errors
Code |
Definition |
|---|---|
EVOEXE0 |
%s has completed without error |
EVOEXE000 |
%s failed calling %s |
EVOEXE001 |
%s failed calling %s with rc: %4d |
EVOEXE002 |
%s failed calling %s, reason: %s |
EVOEXE003 |
Failing system command: %s |
EVOEXE005 |
%s found bad file format %s |
EVOEXE006 |
%s found bad file format %s, line %d |
EVOEXE010 |
%s failed to open file %s, reason : %s |
EVOEXE011 |
%s failed to delete file %s, reason: %s |
EVOEXE012 |
Please check file permissions |
EVOEXE015 |
%s failed to obtain file statistics for file %s, reason: %s |
EVOEXE020 |
Memory allocation failure, check available memory |
EVOEXE030 |
Unable to obtain machine name |
EVOEXE031 |
Unable to obtain host TCP/IP address from host name: %s |
EVOEXE050 |
Invalid selection made, please select again |
EVOEXE100 |
%s process has exited |
EVOEXE102 |
%s process of domain %s has exited |
EVOEXE120 |
%s cannot reach domain %s: exiting |
EVOEXE130 |
%s received an unsuccessful return from %s: returning |
Ironstream Client Errors
Code |
Definition |
|---|---|
EVOCLI000 |
Invalid -display option use: -display DisplayName |
EVOCLI010 |
Client received 'message out of sequence' error from server |
EVOCLI030 |
Invalid command form specified, valid values are 1, 2 or 3 |
Active Status
Code |
Definition |
|---|---|
EVOID010 |
Act_stat could not open input file %s |
EVOID015 |
Switched_pu could not open input file %s |
EVOID020 |
Return from host is not correct in %s: returning |
|---|---|
EVOID030 |
Cannot check status of Session IDs |
Check Status
Code |
Definition |
|---|---|
EVOCS010 |
The name of the resource can not be found on the command line: exiting |
EVOCS011 |
A resource must be selected: exiting |
Refresh
Code |
Definition |
|---|---|
EVOREF070 |
Starting a passive refresh |
Master Message Server (MMS)
Code |
Definition |
|---|---|
EVOMMS001 |
TCP connection established from MMS to domain: %s |
EVOMMS100 |
TCP connection lost from MMS to domain: %s |
EVOMMS110 |
Agent version %1$d received |
Command Server (CS)
Code |
Definition |
|---|---|
EVOCSR001 |
TCP connection established from CS to domain: %s |
EVOCSR100 |
TCP connection lost from CS to domain: %s |
EVOCSR110 |
Agent version %1$d received |
Command and Response Director (ev400crdr)
Code |
Definition |
|---|---|
EVOLLI001 |
ev400crdir terminating |
EVOLLI010 |
Unable to Initialize with OpenView process manager |
EVOLLI015 |
Invalid value for maximum reply buffer - setting to default (100,000) |
EVOLLI016 |
Maximum reply buffer too small - setting to 5000 |
EVOLLI020 |
Error initializing with OpenView Operations Management Server |
EVOLLI025 |
Unable to open directory %1$s |
EVOLLI030 |
Unable to allocate memory for reply buffer |
EVOLLI040 |
Reply sent to %1$s |
EVOLLI045 |
Command %1$s sent to %2$s |
EVOLLI050 |
Domain %1$s is not configured - notify system administrator |
EVOLLI060 |
Invalid request format for TCP request - notify system administrator |
EVOLLI065 |
Program error-could not find client connection - notify system administrator |
EVOLLI066 |
Program error occurred - notify system administrator |
EVOLLI100 |
Not connected to domain: %s |
EVOLLI101 |
Lost connection to domain: %s |
EVOLLI102 |
Action request queue full - contact administrator |
EVOLLI103 |
Response message exceeds buffer size |
EVOLLI104 |
Response timeout for this action |
EVOLLI105 |
Unable to allocate additional memory for reply |
EVOLLI106 |
Invalid TCP Request Port specified - using default |
EVOLLI107 |
Unable to Bind TCP Request Port |
ev400ragt Messages
Code |
Definition |
|---|---|
EVORAG010 |
Unable to resolve host name %1$s |
EVORAG020 |
Unable to open configuration file for %1$s |
EVORAG030 |
Error retrieving configuration for %1$s |
EVORAG040 |
Invalid port number found in configuration file for %1$s |
EVORAG050 |
No response from %1$s or error occurred waiting for response |
EVORAG100 |
Primary Manager switch successful |
EVORAG110 |
Distribute All parameter is 'YES' on %1$s |
EVORAG120 |
%1$s Management server requested for primary is not connected |
EVORAG130 |
This server is not authorized to make this request |
EVORAG900 |
Unknown return code %d from %1$s |
ev400reply Messages
Code |
Definition |
|---|---|
EVOXRY010 |
Unable to open DISPLAY |
EVOXRY020 |
ev400hostcmd failed |