Destroying the infrastructure - Data360_DQ+ - 11.X

Data360 DQ+ AWS Installation

Product type
Software
Portfolio
Verify
Product family
Data360
Product
Data360 DQ+
Version
11.X
Language
English
Product name
Data360 DQ+
Title
Data360 DQ+ AWS Installation
Copyright
2024
First publish date
2016
ft:lastEdition
2024-06-06
ft:lastPublication
2024-06-06T12:37:34.761477

Prerequisite: The same prerequisites that are required to deploy the infrastructure are also needed on the machine from which you plan to remove the infrastructure, see Setup requirements.

CAUTION:
Prior to destroying the infrastructure, ensure that you have a backup, as all components, including data, will be destroyed when you run the destroy command.
  1. Navigate to the infra/aws/config folder.
    Note: If you want to destroy the infrastructure from the first deployment that you created, but you have created subsequent deployments that you do not want to destroy, run the following command before completing step 2:terraform state rm module.eb.aws_elastic_beanstalk_application.dqplus
  2. Run the following command:

    terraform plan -destroy -out=destroyplan --var-file=dqplus.tfvarsvars.auto.tfvars && terraform apply destroyplan

    Note: If you are not using the same machine that you used to create the infrastructure, ensure that you are running the destroy command in the infra/aws/config directory, and that you have copied the four files that were created after deploying the infrastructure into this location (see step 7 in the "Creating the infrastructure" topic).
  3. When asked if you want to proceed, type yes.
Tip: If you receive an error, try repeating the above steps to rule out the possibility of a transient network issue.