Correcting Uncoded Records - Code-1_Plus - 5.0

CODE-1 Plus Guide for IBM i

Product type
Software
Portfolio
Verify
Product family
Data Quality - Postals
Product
CODE-1 Plus
Version
5.0
Language
English
Product name
CODE-1 Plus
Title
CODE-1 Plus Guide for IBM i
Copyright
2024
First publish date
1998
ft:lastEdition
2024-05-15
ft:lastPublication
2024-05-15T00:03:43.588945

If you implement the G1CPBNC user-exit program, you can correct uncoded records from the G1CPBNC output file. To correct uncoded records using the CODE-1 Plus Interactive system, use two commands: UR (User Read) and UW (User Write). These commands are described below:

To correct uncoded records from the C1BMNCO output file, follow the steps below:

  1. Start at the CODE-1 Plus Interactive System screen.

  2. Type UR in the Command field.

    An uncoded address appears in the input area.

  3. You can use any address matching or database inquiry functions necessary to find a match for this address.

  4. Once the uncoded address is matched to the database and corrected, type UW in the Command field. The corrected address is written to an output file.

  5. Repeat steps 2 through 4 until all the records in the uncoded records output file are corrected.

Note: iFor information on the G1CPBNC program, refer to Batch Uncoded Records Interface (G1CPBNC).