Scrolling Through the Match Results Screens - Code-1_Plus - 5.0

CODE-1 Plus Guide for IBM i

Product type
Software
Portfolio
Verify
Product family
Data Quality - Postals
Product
CODE-1 Plus
Version
5.0
Language
English
Product name
CODE-1 Plus
Title
CODE-1 Plus Guide for IBM i
Copyright
2024
First publish date
1998
ft:lastEdition
2024-05-15
ft:lastPublication
2024-05-15T00:03:43.588945

There are six screens of match results in the CODE-1 Plus Interactive System. Each screen shows you different information about your match attempt. These screens are the following:

  • RC—Return Codes screen

  • DS—Delivery Sequence Footnotes2 screen

  • PE—Parsed Elements screen

  • ME—Multiple Elements screen

  • ST—Statistics screen

  • DI—Miscellaneous Information/Base Address screen.

You can access these screens from anywhere in the system by typing the screen's 2-character code in the Command field. You can display these screens sequentially in the order shown below with the DOWN command or F8 or ROLL UP keys and the UP command or the F7 or ROLL DOWN keys.

Sequential Order of CODE-1 Plus Interactive System Screens

In addition to the six match results screens, there are three other screens that support the address matching function. These screens follow:

  • ER—Expanded Return Codes screen shows you English descriptions of the return codes.

  • MS—Match Settings screen enables you to change the settings for the match algorithms to control the strictness of the match attempt.

  • GC—Geographic Codes screen enables you to see Geographic Coding Results for your address (if the Geographic Coding System is installed).

  • DB—Database Commands displays the information for your database, including software release and the expiration date of your databases.

To view one of the above screens, type its 2-character code in the Command field and press the Enter key.

Note: iIf you change to one of these match results screens, and attempt another match, the Return Codes screen is not re-displayed; the screen that is currently shown remains until you move to another screen. To return to the Return Codes screen, enter RC in the Command field.