Instructions - assure_ioptimize - Assure_Elevated_Authority_Manager_(EAM) - Assure_Secure_File_Transfer_PGP - Assure_Security_Multi-Factor_Authentication_(MFA) - Assure_DB2_Data_Monitor_(DB2MON) - Assure_System_Access_Manager_(SAM) - assure_mimix - Assure_Secure_File_Transfer_ - Assure_Encryption - Assure_Secure_File_Transfer - Required_for_All_Modules - assure_itera - Assure_Monitoring_and_Reporting_(AMR) - Assure_Secure_File_Transfer_with_PGP - 10.0

The following steps must be performed after successfully installing on all systems:

1. Before starting iOptimize, review the cross-reference information in the iOptimize Portal Application User Guide. Many iOptimize inquiries depend on the completion of the initial cross-reference which may take several hours depending on the system setup.

   Note: It is recommended to start iOptimize for the first time during a period when general activity is low. Also, further configuration to improve performance or streamline operations can be done after the initial cross-reference completes.

   The following system values are set by iOptimize:

   System Value	Value	Description
   QAUDCTL	*NOQTEMP	Suggested, but not required
   QAUDCTL	*OBJAUD	Required for real-time cross-reference
   QAUDCTL	*AUDLVL	Required for real-time cross-reference
   QAUDLVL	*CREATE	Required for real-time cross-reference
   QAUDLVL	*DELETE	Required for real-time cross-reference
   QAUDLVL	*SECCFC	Required for real-time cross-reference (profiles)
   QAUDLVL	*SECRUN	Required for real-time cross-reference (profiles)
   QAUDLVL	*SECVLDL	Required for real-time cross-reference (profiles)
   QAUDLVL	*OBJMGT	Required for real-time cross-reference
   QAUDLVL	*SAVRST	Required for real-time cross-reference
   QAUDLVL	*SPLFDTA	Required for real-time spool file cross-reference

   Note: Cross-reference activity will change an object's auditing value from *NONE to *CHANGE for all objects on the system except for files and the following object types: *DTAARA, *DTAQ, *FILE, and *USRSPC (the cross-reference will leave their values at *NONE). However, if the object audit value was set to *CHANGE or *ALL prior to running the cross-reference, that object auditing value remains for all object types. The value of *CHANGE (or *ALL) is subsequently used by the real-time cross-reference to pick up object changes. (See the iOptimize User Guide for information on the cross-reference capability.)

2. Use the following command to start the iOptimize subsystem on all systems:

   
             installation-library/STRID *ALL

3. For the Assure Unified Interface, do one of the following:

   • If you use the Assure Unified Interface from a supported Windows^® platform, use Installing or upgrading the Assure UI server and portal application - Win-dows to install the latest portal application.

   • If you use the Assure Unified Interface from an IBM i platform, use Updating the portal application and starting the portal server - IBM i.

   • If the Assure Unified Interface is not installed on the IBM i system where you want it to run, install it and complete its setup using the procedures in Setting up the Assure Unified Interface.