Update *CMD points associated with point group *SQLQRY - Assure_Secure_File_Transfer_ - Assure_Elevated_Authority_Manager_(EAM) - Assure_Secure_File_Transfer_PGP - Assure_Encryption - Assure_Secure_File_Transfer - Required_for_All_Modules - Assure_Monitoring_and_Reporting_(AMR) - Assure_Security_Multi-Factor_Authentication_(MFA) - Assure_DB2_Data_Monitor_(DB2MON) - Assure_System_Access_Manager_(SAM) - Assure_Secure_File_Transfer_with_PGP - 7.0

Assure Security Installation (Manual) Guide
Product type
Software
Portfolio
Integrate
Product family
Assure
Product
Assure Security > Assure Elevated Authority Manager (EAM)
Assure Security > Assure Encryption
Assure Security > Assure Secure File Transfer
Assure Security > Required for All Modules
Assure Security > Assure Monitoring and Reporting (AMR)
Assure Security > Assure Security Multi-Factor Authentication (MFA)
Assure Security > Assure DB2 Data Monitor (DB2MON)
Assure Security > Assure System Access Manager (SAM)
Assure Security > Assure Secure File Transfer with PGP
Version
7.0
Language
English
Content type
Installation (Manual) Guide
Product name
Assure Security
Title
Assure Security Installation (Manual) Guide
Copyright
2023
First publish date
1999
Last updated
2025-01-05
Published on
2025-01-05T12:58:06.220000
Do the following:

  1. Hold all Assure System Access Manager activity by using the command:

    product-library/CHGQXACT HLDQX(*HLD)
  2. To identify all the commands that are attached to the Point Group *SQLQRY, do the following:
    1. Access the Work with Point Groups display using the command:
      product-library/WRKQXGPNT
    2. Type 5 (Display) next to the group *SQLQRY and press Enter.

      The display refreshes to show a list of points, which may vary based on what models are installed. The points associated with the *SQLQRY group are selected with a 1 and are in a different color.

    3. Write down the names of the points associated with the *SQLQRY group. Page down as needed to view all of the points. When you complete this, press F3 (Exit).

      The following images are examples. You may have more or fewer points in this group.

  3. Access the Work with Points display using the command:

    product-library/WRKQXPNT
  4. For each of the *CMD exit points you identified in Step 2, do the following to change the definition to the new settings:
    1. Check the Status column for the point. If it is *ON, type 10 (Stat *ON/*OFF) next to the point to change it to *OFF.
    2. Type 2 (Change) next to the point and press Enter.
    3. The configuration for the point is displayed. In the Before/After field, type *BOTH and press Enter.

      For example:

    4. Press Enter to save the changes, then press Enter again to return to the list on the Work with Points display.
    5. For any points that were on when you performed Step 4a type 10 (Stat *ON/*OFF) next to the point to turn them *ON.
    6. Repeat all of Step 4 for each point in the *SQLQRY group.

  5. Release the hold on Assure System Access Manager activity by using the command:

    product-library/CHGQXACT HLDQX(*RLS)