These instructions will start target journal inspection processes on a selected system. If the system is the target system of one or more data groups whose journal definitions are configured for target journal inspection, a journal inspection job is started for the system journal and for each user journal on the system.
If the system is the target system for replication, an inspection job is started for the system journal and for each user journal on the system that is identified within data groups replicating to the system.
Target journal inspection processes start at the last sequence number in the currently attached journal receiver in the following cases:
When it is the first time a target journal inspection process is started
When starting after being ended and the last processed receiver is no longer available
When starting after enabling target journal inspection in a journal definition where it was previously disabled
When starting target journal inspection after it was previously ended, processing begins with the next sequence number after the last processed sequence number.
To start target journal inspection processes for a system, do the following
-
Do one of the following:
-
From MIMIX Intermediate Main Menu, select option
2(Work with Systems) and press Enter. -
From the Work with Application Groups display, use option
12(Node entries). On the resulting Work with Node Entries display, press F7 (Systems).
-
The Work with Systems display appears. Type a
9(Start) next to the system definition you want and press Enter.The Start MIMIX Managers display appears. At the Target journal inspection prompt, verify the value is
*YESand press Enter.