Audit compliance status is displayed on the Compliance summary view of the Work with Audits display. Audits with potential problems are at the top of the list. Compliance is determined for each individual audit based on the date when the audit last completed its compare phase.
Do the following from the management system:
If necessary, do one of the following to access the Work with Audits display.
From the MIMIX Intermediate Main Menu, select option
6(Work with audits) and press Enter. Then useF10as needed to access the Compliance viewEnter the command:
installation-library/WRKAUD VIEW(*COMPLY)
Check the Compliance column for values of *ATTN and *ACTREQ.
*ATTN -The audit is approaching an out of compliance state as determined by the Audit warning threshold policy. Attention is required to prevent the audit from becoming out of compliance.
*ACTREQ - The audit is out of compliance with the Audit action threshold policy. Action is required. Perform an audit of the data group.
To resolve a problem with audit compliance, the audit in question must be run and complete its compare phase.
- To see when the scheduled run of the audit will occur, press
F11. -
To see when both scheduled and prioritized audits will run, press
F10to access the Audit summary view, then useF11to toggle between views. -
To run the audit now, select option
9(Run rule) and press Enter. This action will select all replicated objects associated with the class of the audit. For more Information, see Running an audit immediately.
- To see when the scheduled run of the audit will occur, press