Starting MIMIX - assure_mimix - 10.0

To start all MIMIX products within an installation library, do the following:

1. If you are starting MIMIX for the first time or starting MIMIX after a system IPL, do the following:

   1. Use the command WRKSBSJOB SBS(MIMIXSBS) to verify that the MIMIX  subsystem is running. If the MIMIXSBS is not already active, start the subsystem using the STRSBS SBSD(MIMIXQGPL/MIMIXSBS)command.

   2. If MIMIX uses TCP/IP for system communication, the TCP/IP servers must be running. If TCP/IP is not already active, start TCP/IP using the port number defined in the transfer definitions and the procedures described in Starting the TCP/IP server.

2. Do one of the following:

   • From the MIMIX Basic Main Menu, select option 2 (Start MIMIX) and press Enter.

   • From a command line type STRMMX and press Enter.

3. The Start MIMIX (STRMMX) display appears. Accept the default value for the System definition prompt and press Enter.

4. If you see a confirmation display, press Enter to start MIMIX.