The AG Proc Status column represents a summary of the most recent run of all procedures defined for the application group.
Important! Check the status of the AG Proc Status column and address any problem indicated by *ATTN or *ACTIVE status before attempting to resolve any problem reported in other columns on the Work with Application Groups display. Status shown in other columns will likely change after active procedures complete or procedures which require attention have been addressed.
Column Value |
Description and Action |
|---|---|
*ACTIVE |
One or more of the last started runs of the procedures to run are still active or queued. Wait for the procedure to complete. Do not attempt to correct other status problems reported on the display until the procedure completes. Use option 21 (Procedure status) to view the status of the last started runs of procedures. |
*ATTN |
One or more of the last started runs of the procedures have a status that requires attention. Resolve the procedure problems before attempting to correct other status problems reported on the Work with Application Groups display.
Note: For a virtual switch procedure (type *SWTVRT), a *MSGW status
for step MXVRTRCY is expected and should remain unanswered for the
duration of the testing phase of the virtual switch. Do not respond
to the message for step MXVRTRCY until testing is complete and you
are ready for the recovery phase of the virtual switch procedure.
Return to the Work with Application Groups display to check for
other reported problems with the application group that need to be
resolved.
For detailed information, see Working with procedures and steps. |