Verifying a communications link for system definitions - assure_mimix - 10.0

Assure MIMIX Administrator Reference

Product type
Software
Portfolio
Integrate
Product family
Assure
Product
Assure MIMIX™ Software
Version
10.0
Language
English
Product name
Assure MIMIX
Title
Assure MIMIX Administrator Reference
Copyright
2023
First publish date
1999
ft:lastEdition
2024-05-07
ft:lastPublication
2024-05-07T13:36:02.962500

Do the following to verify that the communications link defined for each system definition is operational:

  1. From the MIMIX Basic Main Menu, type an 11 (Configuration menu) and press Enter.

  2. From the MIMIX Configuration Menu, type a 1 (Work with system definitions) and press Enter.

  3. From the Work with System Definitions display, type an 11 (Verify communications link) next to the system definition you want and press Enter. You should see a message indicating the link has been verified.

    Note: If the system manager is not active, this process will only verify that communications to the remote system is successful. You will also see a message in the job log indicating that “communications link failed after 1 request.” This indicates that the remote system could not return communications to the local system.
  4. Repeat this procedure for all system definitions
    Note: MIMIX uses the Verify Communications Link command to validate the information that has been specified for the Relational database (RDB) parameter. MIMIX also uses VFYCMNLNK to verify that the System 1 and System 2 relational database names exist and are available on each system.